How are terminal wires riveted?
How are terminal wires riveted?
In modern industrial production, terminal has become an essential component, is an indispensable part of industrial electrical control equipment. At present, our country has a number of terminal products. But because of lack of market demand and market specification, the quality of terminal products produced by enterprise is bad and some are different, their performance is different and their price is wide apart, making it difficult to ensure and maintain the quality of terminal products. Therefore, special attention must be paid to the selection and use of wiring terminals:
The first is to select the terminal to be installed according to the type and shape of the connected piece, which is designed for the correct installation of the wiring hole. For a connected piece, the size shall be as specified. But the connection of some small electrical appliances is different: such as wire joints, sockets and plugs should be in accordance with their different structure, size and shape and use different terminals, so the use of the same model or specification of different section diameter wire joints.
Second: choose suitable application scope and the relationship between industry standards and enterprise requirements. If the requirements of high insulation grade, strong voltage resistance, high voltage resistance, good conductivity and good aging resistance are strictly grasped, higher grade varieties should be selected; But for some insulation strength has not reached the general need, and must meet the safety and production requirements should be made of lower grade materials; Otherwise, the product can not be used safely or cannot be used.
How are terminal wires riveted? When the application requirements are not at the same time must choose different types and specifications, applicable to different fields (such as electrical appliance installation) or to meet different use requirements (such as electrical product quality) and use environment (such as high temperature and low temperature) or related to standards (such as national and industrial standards), but no matter what kind of standard should be noted its consistency.
Fourthly: pay attention to the relationship between the different technical requirements aspects. If an enterprise has to change the design specification of a certain type of terminal because of some considerations, It must be noted that enterprises in the selection of a type of terminal has met or lower than the national standard, also known as the "ministry of standards"), or related to the design and has obtained the safety production license qualification and passed the relevant national inspection agencies to verify the decision made by the standards can not be lower than these technical requirements or national standards must be complied with; Otherwise, it will bring irreversible losses to the enterprise.
Premier Cable specializes in aviation plugs, waterproof connectors, sensor connectors, cable connectors, cable sockets, automotive wiring harnesses, round connectors, and waterproof sockets with good quality and good price, welcome to call for consultation and cooperation. firstname.lastname@example.org